Araldite joints are water proof, heat proof, stress proof, and resistant to most chemicals. Non-corrosive and non-toxic. 

Package Contains 

Araldite AW 106 Standard Epoxy Adhesive ( Resin 1kg + Hardener 800g ) 1.8kg x 1 Piece

M.R.P of the product is Resin Rs.640 + Hardener Rs. 420 = Rs.1060

 Rs.1060+ Shipping = Rs.1600 

This pack contains two tubes :

Features:

·         Worlds Strongest Bond

·         Versatile

·         No Shrinking after curing

·         Prevents sagging

Uses: 

ARALDITE Standard bonds anything to anything like metals, ceramic, marble, granite, most plastic/PVC, ivory, asbestos, glass, wood, leather rubber etc. However it is not suitable for plastics like HDPE, PTFE and silicon rubber. 

How to Apply:

·         Clean both the surfaces to be bonded.

·         Take equal quantities(by volume) of resin and hardener of Adralite Standard.

·         Mix the resin and hardner until it forms a uniform colour.

·         Apply a thin coat of the mixture on both the surfaces.

·         Join the surfaces and apply pressure using tape, clamps or band.

·         Remove the pressure after 6 -8 hours.

·         Full strength is achieved in 24 hours.

 Resin and Hardener :

·         For best results :

·         Roughen, dry and degrees surfaces to be bonded.

·         Squeeze out equal amounts by volume, from both tubes.

·         Mix thoroughly.

·         Apply thin layer on both surfaces.

·         Clamp joint overnight as Araldite sets.

Araldite epoxy resins have the following outstanding properties :

·          

·         Excellent adhesion to many different materials

·         Great strength, toughness and resilience

·         Excellent resistance to chemical attack and to moisture

·         Outstanding electrical insulating properties

·         Absence of volatiles on curing

·         Negligible shrinkage

·         Other epoxy resins for bonding, casting, tooling, pattern making, surface coating, lamination and concrete repairs are available.